Mixing block ID2/2
Available downloads for "Mixing block ID2/2"
Product information "Mixing block ID2/2"
DOPAG 2K valves are used to process 2K materials with similar viscosities and a relatively long pot life. Recommended mixing ratios are from 100:100 to 100:20. The static mixing system consists of pneumatic driven snuff back piston and a plastic mixer. Due to the infinitely adjustable snuff back function dripping is avoided when metering ends. Different sealing and material versions for chemically aggressive and abrasive 2K materials are available.
|Chem. resistance of metals A:||Stainless|
|Chem. resistance of metals B:||Stainless|
|Chem. resistance of nonmetals A:||No specific resistance|
|Chem. resistance of nonmetals B:||No specific resistance|
|Clear width A:||2 mm|
|Clear width B:||2 mm|
|Connection thread:||UNC 7/8-9|
|Inner diameter A:||2 mm|
|Inner diameter B:||2 mm|
|Maximum pressure:||200 bar|
|Mech. resistance A:||Wear resistant|
|Mech. resistance B:||Wear resistant|
|Mixing system:||Static mixing system|
|Needle seal type A:||Diaphragm seal|
|Needle seal type B:||Diaphragm seal|
|Working pressure:||160 bar|