Hand metering valve 0.05-0.5ml
Article number: 1017833
€1.00 *
This product will be released at 20 April 2029
Large product portfolio
Highest quality
Individual advice
Secure price request
Chamber metering valves are used for dot application of low to high viscosity media. Compared to... more
Product information "Hand metering valve 0.05-0.5ml"
Chamber metering valves are used for dot application of low to high viscosity media. Compared to the needle metering valve, they offer a larger range of shot sizes. Thanks to an innovative design that features a snuff back effect, these valves are characteristic for their high process stability and dripfree application when dispensing low-viscosity media. The shot size is determined by the chamber volume, which can be adjusted simply within a predetermined range using a stop screw. The metering cycle is controlled either pneumatically or electrically via a solenoid valve. This valve series allows a highly repeatable metering of small quantities up to 100 ml within short cycle times. Manual application with a handle is just as possible as the integration into a fully automated process.
Related links to "Hand metering valve 0.05-0.5ml"
Properties of "Hand metering valve 0.05-0.5ml"
| Version: | Handle vertical |
| Maximum pressure: | 150 bar |
| Min. metering quantity: | .05 ml |
| Max. metering quantity: | .5 ml |
| Chem. resistance of metals: | No specific resistance |
| Mech. resistance: | No specific resistance |
| Drive: | pneumatic |
| Chem. resistance of nonmetals: | No specific resistance |
| minimum viscosity: | 1000 mPa.s |
| maximum viscosity: | 1000000 mPa.s |
| Min. material inlet pressure: | 40 bar |
| Max. material inlet pressure: | 80 bar |
| Operating type: | Pneumatically |
| allowable maximum material temperature: | 80 Cel |
| allowable maximum ambient temperature: | 40 Cel |
| Sealing control part: | Lip seal |
| Max. pressure range: | 25 - 150 bar |
| Metering range: | 0.050 - 0.500 ml |
| Type: | Chamber meter. valve |
| Outlet thread type: | Inner thread |
| Inlet thread type: | Inner thread |
| Inlet thread size: | G 1/8" |
| Outlet thread size: | G 1/4" |
| Stroke detection: | Str.scann.full/empty |
Available downloads for "Hand metering valve 0.05-0.5ml"
Viewed