REQUEST PRICE
Please enter these characters in the following text field.

Fields with * are required
Large product portfolio
Highest quality
Secure price request
Individual advice

Dispensing valve ID2.5

401.12.73
Dispensing valve ID2.5
€1.00 *

This product will be released at 20 April 2029

Single price request
Please enter these characters in the following text field.

Fields with * are required
Large product portfolio
Highest quality
Individual advice
Secure price request
Based on the time-pressure dispensing principle, the needle dispensing valves are most effective... more
Product information "Dispensing valve ID2.5"
Based on the time-pressure dispensing principle, the needle dispensing valves are most effective in continuous applications of low to high viscosity media. Consisting of two structurally separate parts, they have the advantage that material cannot leak into the drive cylinder and interfere with the valve needle movement. The size of the orifice is regulated simply by a stop screw. A special, adjustable seal closes the valve needle off from the valve head, ensuring a perfectly clean and precise application of every single shot. The material passageway can be flushed as and when necessary.
Related links to "Dispensing valve ID2.5"
Properties of "Dispensing valve ID2.5"
Material inlet connection: G 1/4"
Drive cylinder version: Initiator holder
Material inlet version: Inner thread
Seal type: Stuffing box seal
Pneumatic connection to material inlet: 90° offset
Inner diameter: 2.5 mm
Maximum pressure: 315 bar
Working pressure: 250 bar
Mech. resistance: Increased resistance
Material outlet version: with cannula conn.
Chem. resistance of metals: Stainless
Chem. resistance of nonmetals: Highly resistant
Viewed
© 2022 Hilger & Kern Group
FOLLOW US: