Hi you, create a customer account to get access to data sheets, service literature, step files and user manuals: CLICK HERE.

Metering valve 0.001-0.01ml

Price on request

Article number: 401.06.18
Available downloads for "Metering valve 0.001-0.01ml"
Product information "Metering valve 0.001-0.01ml"
Needle metering valves are suitable for dot application of low to high viscosity media. With this series, very small quantities of up to 3 ml per shot can be discharged with high reproducibility and short cycle times. The valve consists of two structurally separate parts, meaning that material cannot leak into the drive cylinder and interfere with the movement of the valve needle. This feature makes the needle metering valve an exceptionally reliable and low-maintenance piece of metering equipment. Shot size is determined by the volume of the valve chamber, which can be adjusted simply within a predetermined range using a stop screw. The metering cycle can be controlled either pneumatically or electrically via a solenoid valve. DOPAG needle metering valves are perfectly suitable for manual applications with a handle as well as for fully automated processes.
Chem. resistance of metals: Increased resistance
Chem. resistance of nonmetals: Highly resistant
De-aeration screw: right
Drive: pneumatic
Inlet thread size: G 1/8"
Inlet thread type: Outer thread
Max. material inlet pressure: 20 bar
Max. metering quantity: .01 ml
Max. pressure range: 3 - 20 bar
Max. viscosity: 100000 mPa.s
Maximum pressure: 20 bar
Mech. resistance: Increased resistance
Metering range: 0.001 - 0.010 ml
Min. material inlet pressure: 3 bar
Min. metering quantity: .001 ml
Min. viscosity: 10 mPa.s
Needle seal of metering part: Stuffing box
Outlet: with cannula conn.
Stroke adjustment: Setting scale
Stroke detection: Full / Empty, Str.scann.full/empty
Type: Needle meter. valve
allowable maximum ambient temperature: 40 Cel
allowable maximum material temperature: 80 Cel
maximum viscosity: 100000 mPa.s
minimum viscosity: 10 mPa.s

Accessory Items

Solenoid valve plate with industrial plug type CI
Article number: 100.15.02

Price on request

Handle electric with switch
Article number: 1007396

Price on request

Set signal transmitter with 5m cable
Article number: 131861

Price on request

MICRO-FLOW Sensor cpl.
Article number: 403.04.21
The micro-flow sensor detects whether material has been dispensed or not, without contact with the material. An analogue signal is amplified and forwarded to the electronic controller. The sensor is able to capture up to 120 metering cycles per minute. Should the electronic controller fail to send a signal as a result of no material flow, the master control unit will activate an alarm.

Price on request

Handle pneumatic
Article number: 1007395

Price on request

Handle electric with initiator
Article number: 1007397

Price on request

Set signal transmitter with plug M8x1
Article number: 131862

Price on request

dispensing adapter iM12x1 iG1/8
Article number: 1006993

Price on request