Material pressure regulator ID4
Available downloads for "Material pressure regulator ID4"
Product information "Material pressure regulator ID4"
Material pressure regulators reduce the pressure of the pumped material down to the optimum working value. They are designed specifically for the precise dosing of lubricants, silicones and reactive materials like adhesives. Along with reducing pressure, the valves also compensate for pulsations that occur when material is delivered via piston pumps, more specifically in the moment of the changeover position of the pump. This problem manifests itself in fluctuations in material pressure and flow, and can lead to reduced product quality - particularly in cases of very small doses, continuous or spray applications. The material pressure regulator is a guarantee of a perfectly stable material flow. For abrasive or reactive material, we recommend our diaphragm material pressure regulators.
|Chem. resistance of metals:||No specific resistance|
|Chem. resistance of nonmetals:||No specific resistance|
|Flow direction:||transverse flow|
|Inner diameter:||4 mm|
|Max. material inlet pressure:||250 bar|
|Max. material output pressure:||150 bar|
|Maximum pressure:||400 bar|
|Mech. resistance:||Increased resistance|
|Min. material inlet pressure:||30 bar|
|Min. material output pressure:||10 bar|
|Regulating piston sealing type:||Diaphragm seal|
|Temperature range:||5 - 60 °C|