Dynastat ID4/1
Available downloads for "Dynastat ID4/1"
Login
Product information "Dynastat ID4/1"
The DOPAG dynastat is used to process 2K materials. With its static dnymic mixing principle it is ideal for high mixing ratios (e.g. 100:5) and when there is a large difference between the viscosities of A and B material. With the dynastat very small metering volumes can be achieved at small output rates. Different sealing and material versions for chemically aggressive and abrasive 2K materials are available.
Chem. resistance of metals A: | No specific resistance |
---|---|
Chem. resistance of metals B: | No specific resistance |
Chem. resistance of nonmetals A: | No specific resistance |
Chem. resistance of nonmetals B: | No specific resistance |
Clear width A: | 4 mm |
Clear width B: | 1 mm |
Connection thread: | UNC 7/8-9 |
Drive shaft seal: | Carbide slide ring |
Inner diameter A: | 4 mm |
Inner diameter B: | 1 mm |
Maximum pressure: | 25 bar |
Mech. resistance A: | Wear resistant |
Mech. resistance B: | Wear resistant |
Mixing system: | Static-dynamic mixing system |
Needle seal type A: | V sleeves |
Needle seal type B: | Stuffing box seal |
Working pressure: | 16 bar |