Dispensing valve ID2
Article number: 401.09.08
€1.00 *
Delivery time approx. 5 working days
Large product portfolio
Highest quality
Individual advice
Secure price request
Based on the time-pressure dispensing principle, the needle dispensing valves are most effective... more
Product information "Dispensing valve ID2"
Based on the time-pressure dispensing principle, the needle dispensing valves are most effective in continuous applications of low to high viscosity media. Consisting of two structurally separate parts, they have the advantage that material cannot leak into the drive cylinder and interfere with the valve needle movement. The size of the orifice is regulated simply by a stop screw. A special, adjustable seal closes the valve needle off from the valve head, ensuring a perfectly clean and precise application of every single shot. The material passageway can be flushed as and when necessary.
Related links to "Dispensing valve ID2"
Properties of "Dispensing valve ID2"
| Operating type: | Pneumatically |
| Material inlet connection: | G 1/4" |
| Drive cylinder version: | Initiator holder |
| Material inlet version: | Inner thread |
| Pneumatic connection to material inlet: | 0° offset |
| Seal type: | V sleeves |
| Maximum pressure: | 315 bar |
| Working pressure: | 250 bar |
| Inner diameter: | 2 mm |
| Mech. resistance: | Increased resistance |
| Chem. resistance of metals: | No specific resistance |
| Material outlet version: | with cannula conn. |
| Chem. resistance of nonmetals: | Highly resistant |
Available downloads for "Dispensing valve ID2"
Viewed