Dispensing valve ID8
Available downloads for "Dispensing valve ID8"
Login
Product information "Dispensing valve ID8"
Based on the time-pressure dispensing principle, the needle dispensing valves are most effective in continuous applications of low to high viscosity media. Consisting of two structurally separate parts, they have the advantage that material cannot leak into the drive cylinder and interfere with the valve needle movement. The size of the orifice is regulated simply by a stop screw. A special, adjustable seal closes the valve needle off from the valve head, ensuring a perfectly clean and precise application of every single shot. The material passageway can be flushed as and when necessary.
| Chem. resistance of metals: | No specific resistance |
|---|---|
| Chem. resistance of nonmetals: | No specific resistance |
| Function: | Snuffer effect |
| Inner diameter: | 8 mm |
| Material inlet connection: | G 3/4" |
| Material inlet version: | Inner thread |
| Material outlet connection: | G1/2" |
| Material outlet version: | Inner thread |
| Maximum pressure: | 315 bar |
| Mech. resistance: | Increased resistance |
| Pneumatic connection to material inlet: | 0° offset |
| Seal type: | V sleeves |
| Working pressure: | 250 bar |
Accessory Items
