Metering valve 0.003-0.2ml
Available downloads for "Metering valve 0.003-0.2ml"
Login
Product information "Metering valve 0.003-0.2ml"
Needle metering valves are suitable for dot application of low to high viscosity media. With this series, very small quantities of up to 3 ml per shot can be discharged with high reproducibility and short cycle times. The valve consists of two structurally separate parts, meaning that material cannot leak into the drive cylinder and interfere with the movement of the valve needle. This feature makes the needle metering valve an exceptionally reliable and low-maintenance piece of metering equipment. Shot size is determined by the volume of the valve chamber, which can be adjusted simply within a predetermined range using a stop screw. The metering cycle can be controlled either pneumatically or electrically via a solenoid valve. DOPAG needle metering valves are perfectly suitable for manual applications with a handle as well as for fully automated processes.
Chem. resistance of metals: | No specific resistance |
---|---|
Chem. resistance of nonmetals: | No specific resistance |
De-aeration screw: | right |
Drive: | pneumatic |
Inlet thread size: | G 1/4" |
Inlet thread type: | Outer thread |
Max. material inlet pressure: | 50 bar |
Max. metering quantity: | .2 ml |
Max. pressure range: | 3 - 50 bar |
Max. viscosity: | 200000 mPa.s |
Maximum pressure: | 50 bar |
Mech. resistance: | Increased resistance |
Metering range: | 0.003 - 0.200 ml |
Min. material inlet pressure: | 3 bar |
Min. metering quantity: | .003 ml |
Min. viscosity: | 10 mPa.s |
Needle seal of metering part: | Double lip seal |
Operating type: | Pneumatically |
Outlet: | with cannula conn. |
Stroke adjustment: | Setting scale |
Stroke detection: | Full / Empty, Str.scann.full/empty |
Type: | Needle meter. valve |
Version: | flow optimized |
allowable maximum ambient temperature: | 40 Cel |
allowable maximum material temperature: | 80 Cel |
maximum viscosity: | 200000 mPa.s |
minimum viscosity: | 10 mPa.s |