Dispensing valve ID12
Available downloads for "Dispensing valve ID12"
Login
Product information "Dispensing valve ID12"
Based on the time-pressure dispensing principle, the needle dispensing valves are most effective in continuous applications of low to high viscosity media. Consisting of two structurally separate parts, they have the advantage that material cannot leak into the drive cylinder and interfere with the valve needle movement. The size of the orifice is regulated simply by a stop screw. A special, adjustable seal closes the valve needle off from the valve head, ensuring a perfectly clean and precise application of every single shot. The material passageway can be flushed as and when necessary.
| Chem. resistance of metals: | No specific resistance |
|---|---|
| Chem. resistance of nonmetals: | No specific resistance |
| Drive cylinder version: | Initiator holder |
| Inner diameter: | 12 mm |
| Material inlet connection: | G 1/2" |
| Material inlet version: | Inner thread |
| Material outlet version: | Outl. tube int. head |
| Maximum pressure: | 315 bar |
| Mech. resistance: | Increased resistance |
| Pneumatic connection to material inlet: | 0° offset |
| Seal type: | V sleeves |
| Working pressure: | 100 bar |
Accessory Items
