Cable socket M8 4-pole straight 10m

Shot valves are extremely fast-switching valves designed for contactless (from a distance) applications of grease and oil in automated processes. They are capable of dispensing the smallest amounts of material at the speed of up to 200 cycles per second. The valves are available with both short and long nozzles, which enables them to cover various angles of application. Depending on the nozzle size, media with different viscosities can be processed. With the ratchet regulator the shot size can be adjusted easily.

The rotary applicator was specially developed for 360° greasing or oiling of holes. For rotary lubrication, the applicator is attached to the SHV-01 shot valve from DOPAG. The material is applied contactless (from a distance) by centrifugal force. The patented rotary applicator offers a high flexibility and various applications, as a wide range of different diameters can be covered. The amount of the material can be variably adjusted. A wide range of rotation speed ensures an ideal material distribution. The valve seat closes completely, so there will be no material dripping. Overspray will be avoided and material waste is reduced. Further, self cleaning with a special spinning function is included.

Shot valves are extremely fast-switching valves designed for contactless (from a distance) applications of grease and oil in automated processes. They are capable of dispensing the smallest amounts of material at the speed of up to 200 cycles per second. The valves are available with both short and long nozzles, which enables them to cover various angles of application. Depending on the nozzle size, media with different viscosities can be processed. With the ratchet regulator the shot size can be adjusted easily.

Shot valves are extremely fast-switching valves designed for contactless (from a distance) applications of grease and oil in automated processes. They are capable of dispensing the smallest amounts of material at the speed of up to 200 cycles per second. The valves are available with both short and long nozzles, which enables them to cover various angles of application. Depending on the nozzle size, media with different viscosities can be processed. With the ratchet regulator the shot size can be adjusted easily.

The rotary applicator was specially developed for 360° greasing or oiling of holes. For rotary lubrication, the applicator is attached to the SHV-01 shot valve from DOPAG. The material is applied contactless (from a distance) by centrifugal force. The patented rotary applicator offers a high flexibility and various applications, as a wide range of different diameters can be covered. The amount of the material can be variably adjusted. A wide range of rotation speed ensures an ideal material distribution. The valve seat closes completely, so there will be no material dripping. Overspray will be avoided and material waste is reduced. Further, self cleaning with a special spinning function is included.

The spray valve is used for full-surface applications of greases and oils. It is suitable for both intermittent and continuous material applications. A unique feature of this valve is the integration of a membrane, which is used for the adjustment of the air blow duration after each material shot - this serves the cleaning of the nozzle. Short air ways in the body of the valve and a flange-mounted 5/2 way solenoid valve allow a very fast and accurate intermittent operation. A wide range of available extensions and attachments open up the possibility of spray application in hard-to-access areas, while various aircaps allow the customisation of the spray coating pattern. With the ratchet regulator the shot size can be adjusted easily.

Chamber metering valves are used for dot application of low to high viscosity media. Compared to the needle metering valve, they offer a larger range of shot sizes. Thanks to an innovative design that features a snuff back effect, these valves are characteristic for their high process stability and dripfree application when dispensing low-viscosity media. The shot size is determined by the chamber volume, which can be adjusted simply within a predetermined range using a stop screw. The metering cycle is controlled either pneumatically or electrically via a solenoid valve. This valve series allows a highly repeatable metering of small quantities up to 100 ml within short cycle times. Manual application with a handle is just as possible as the integration into a fully automated process.

The spray valve is used for full-surface applications of greases and oils. It is suitable for both intermittent and continuous material applications. A unique feature of this valve is the integration of a membrane, which is used for the adjustment of the air blow duration after each material shot - this serves the cleaning of the nozzle. Short air ways in the body of the valve and a flange-mounted 5/2 way solenoid valve allow a very fast and accurate intermittent operation. A wide range of available extensions and attachments open up the possibility of spray application in hard-to-access areas, while various aircaps allow the customisation of the spray coating pattern. With the ratchet regulator the shot size can be adjusted easily.

Shot valves are extremely fast-switching valves designed for contactless (from a distance) applications of grease and oil in automated processes. They are capable of dispensing the smallest amounts of material at the speed of up to 200 cycles per second. The valves are available with both short and long nozzles, which enables them to cover various angles of application. Depending on the nozzle size, media with different viscosities can be processed. With the ratchet regulator the shot size can be adjusted easily.

The spray valve is used for full-surface applications of greases and oils. It is suitable for both intermittent and continuous material applications. A unique feature of this valve is the integration of a membrane, which is used for the adjustment of the air blow duration after each material shot - this serves the cleaning of the nozzle. Short air ways in the body of the valve and a flange-mounted 5/2 way solenoid valve allow a very fast and accurate intermittent operation. A wide range of available extensions and attachments open up the possibility of spray application in hard-to-access areas, while various aircaps allow the customisation of the spray coating pattern. With the ratchet regulator the shot size can be adjusted easily.

The volumetric spray valve combines the advantages of the volumetric metering principle with spray technology. Small spray patterns can be applied with maximum metering accuracy and reproducibility. High process stability is guaranteed at all times without material tempering or additional monitoring by means of a flow meter. The metering volume can be easily adjusted using the adjustment screw. A wide range of available extensions and attachments opens up the possibility of spraying in areas that are difficult to access, while various air caps allow the spray pattern to be customised. 

The spray valve is used for full-surface applications of greases and oils. It is suitable for both intermittent and continuous material applications. A unique feature of this valve is the integration of a membrane, which is used for the adjustment of the air blow duration after each material shot - this serves the cleaning of the nozzle. Short air ways in the body of the valve and a flange-mounted 5/2 way solenoid valve allow a very fast and accurate intermittent operation. A wide range of available extensions and attachments open up the possibility of spray application in hard-to-access areas, while various aircaps allow the customisation of the spray coating pattern. With the ratchet regulator the shot size can be adjusted easily.

The spray valve is used for full-surface applications of greases and oils. It is suitable for both intermittent and continuous material applications. A unique feature of this valve is the integration of a membrane, which is used for the adjustment of the air blow duration after each material shot - this serves the cleaning of the nozzle. Short air ways in the body of the valve and a flange-mounted 5/2 way solenoid valve allow a very fast and accurate intermittent operation. A wide range of available extensions and attachments open up the possibility of spray application in hard-to-access areas, while various aircaps allow the customisation of the spray coating pattern. With the ratchet regulator the shot size can be adjusted easily.

The volumetric spray valve combines the advantages of the volumetric metering principle with spray technology. Small spray patterns can be applied with maximum metering accuracy and reproducibility. High process stability is guaranteed at all times without material tempering or additional monitoring by means of a flow meter. The metering volume can be easily adjusted using the adjustment screw. A wide range of available extensions and attachments opens up the possibility of spraying in areas that are difficult to access, while various air caps allow the spray pattern to be customised. 

The volumetric spray valve combines the advantages of the volumetric metering principle with spray technology. Small spray patterns can be applied with maximum metering accuracy and reproducibility. High process stability is guaranteed at all times without material tempering or additional monitoring by means of a flow meter. The metering volume can be easily adjusted using the adjustment screw. A wide range of available extensions and attachments opens up the possibility of spraying in areas that are difficult to access, while various air caps allow the spray pattern to be customised. 

The volumetric spray valve combines the advantages of the volumetric metering principle with spray technology. Small spray patterns can be applied with maximum metering accuracy and reproducibility. High process stability is guaranteed at all times without material tempering or additional monitoring by means of a flow meter. The metering volume can be easily adjusted using the adjustment screw. A wide range of available extensions and attachments opens up the possibility of spraying in areas that are difficult to access, while various air caps allow the spray pattern to be customised. 

The spray valve is used for full-surface applications of greases and oils. It is suitable for both intermittent and continuous material applications. A unique feature of this valve is the integration of a membrane, which is used for the adjustment of the air blow duration after each material shot - this serves the cleaning of the nozzle. Short air ways in the body of the valve and a flange-mounted 5/2 way solenoid valve allow a very fast and accurate intermittent operation. A wide range of available extensions and attachments open up the possibility of spray application in hard-to-access areas, while various aircaps allow the customisation of the spray coating pattern. With the ratchet regulator the shot size can be adjusted easily.

The spray valve is used for full-surface applications of greases and oils. It is suitable for both intermittent and continuous material applications. A unique feature of this valve is the integration of a membrane, which is used for the adjustment of the air blow duration after each material shot - this serves the cleaning of the nozzle. Short air ways in the body of the valve and a flange-mounted 5/2 way solenoid valve allow a very fast and accurate intermittent operation. A wide range of available extensions and attachments open up the possibility of spray application in hard-to-access areas, while various aircaps allow the customisation of the spray coating pattern. With the ratchet regulator the shot size can be adjusted easily.

The spray valve is used for full-surface applications of greases and oils. It is suitable for both intermittent and continuous material applications. A unique feature of this valve is the integration of a membrane, which is used for the adjustment of the air blow duration after each material shot - this serves the cleaning of the nozzle. Short air ways in the body of the valve and a flange-mounted 5/2 way solenoid valve allow a very fast and accurate intermittent operation. A wide range of available extensions and attachments open up the possibility of spray application in hard-to-access areas, while various aircaps allow the customisation of the spray coating pattern. With the ratchet regulator the shot size can be adjusted easily.

The spray valve is used for full-surface applications of greases and oils. It is suitable for both intermittent and continuous material applications. A unique feature of this valve is the integration of a membrane, which is used for the adjustment of the air blow duration after each material shot - this serves the cleaning of the nozzle. Short air ways in the body of the valve and a flange-mounted 5/2 way solenoid valve allow a very fast and accurate intermittent operation. A wide range of available extensions and attachments open up the possibility of spray application in hard-to-access areas, while various aircaps allow the customisation of the spray coating pattern. With the ratchet regulator the shot size can be adjusted easily.

The rotary applicator was specially developed for 360° greasing or oiling of holes. For rotary lubrication, the applicator is attached to the SHV-01 shot valve from DOPAG. The material is applied contactless (from a distance) by centrifugal force. The patented rotary applicator offers a high flexibility and various applications, as a wide range of different diameters can be covered. The amount of the material can be variably adjusted. A wide range of rotation speed ensures an ideal material distribution. The valve seat closes completely, so there will be no material dripping. Overspray will be avoided and material waste is reduced. Further, self cleaning with a special spinning function is included.

Shot valves are extremely fast-switching valves designed for contactless (from a distance) applications of grease and oil in automated processes. They are capable of dispensing the smallest amounts of material at the speed of up to 200 cycles per second. The valves are available with both short and long nozzles, which enables them to cover various angles of application. Depending on the nozzle size, media with different viscosities can be processed. With the ratchet regulator the shot size can be adjusted easily.

Chamber metering valves are used for dot application of low to high viscosity media. Compared to the needle metering valve, they offer a larger range of shot sizes. Thanks to an innovative design that features a snuff back effect, these valves are characteristic for their high process stability and dripfree application when dispensing low-viscosity media. The shot size is determined by the chamber volume, which can be adjusted simply within a predetermined range using a stop screw. The metering cycle is controlled either pneumatically or electrically via a solenoid valve. This valve series allows a highly repeatable metering of small quantities up to 100 ml within short cycle times. Manual application with a handle is just as possible as the integration into a fully automated process.