Hand metering valve 0.1-3ml
Available downloads for "Hand metering valve 0.1-3ml"
Login
Product information "Hand metering valve 0.1-3ml"
Chamber metering valves are used for dot application of low to high viscosity media. Compared to the needle metering valve, they offer a larger range of shot sizes. Thanks to an innovative design that features a snuff back effect, these valves are characteristic for their high process stability and dripfree application when dispensing low-viscosity media. The shot size is determined by the chamber volume, which can be adjusted simply within a predetermined range using a stop screw. The metering cycle is controlled either pneumatically or electrically via a solenoid valve. This valve series allows a highly repeatable metering of small quantities up to 100 ml within short cycle times. Manual application with a handle is just as possible as the integration into a fully automated process.
| Chem. resistance of metals: | No specific resistance |
|---|---|
| Chem. resistance of nonmetals: | No specific resistance |
| Drive: | pneumatic |
| Inlet thread size: | G 1/8" |
| Inlet thread type: | Inner thread |
| Max. material inlet pressure: | 80 bar |
| Max. metering quantity: | 3 ml |
| Max. pressure range: | 25 - 150 bar |
| Max. viscosity: | 1000000 mPa.s |
| Maximum pressure: | 150 bar |
| Mech. resistance: | No specific resistance |
| Metering range: | 0.100 - 3.000 ml |
| Min. material inlet pressure: | 40 bar |
| Min. metering quantity: | .1 ml |
| Min. viscosity: | 1000 mPa.s |
| Needle seal of metering part: | Lip seal |
| Operating type: | Electric Initiator |
| Outlet thread size: | G 1/4" |
| Outlet thread type: | Inner thread |
| Sealing control part: | Lip seal |
| Stroke detection: | Full / Empty, Str.scann.full/empty |
| Type: | Chamber meter. valve |
| Version: | Handle vertical |
| allowable maximum ambient temperature: | 40 Cel |
| allowable maximum material temperature: | 80 Cel |
| maximum viscosity: | 1000000 mPa.s |
| minimum viscosity: | 1000 mPa.s |