Dynastat ID4/1
Available downloads for "Dynastat ID4/1"
Login
Product information "Dynastat ID4/1"
The DOPAG dynastat is used to process 2K materials. With its static dnymic mixing principle it is ideal for high mixing ratios (e.g. 100:5) and when there is a large difference between the viscosities of A and B material. With the dynastat very small metering volumes can be achieved at small output rates. Different sealing and material versions for chemically aggressive and abrasive 2K materials are available.
| Chem. resistance of metals A: | Increased resistance |
|---|---|
| Chem. resistance of metals B: | Increased resistance |
| Chem. resistance of nonmetals A: | No specific resistance |
| Chem. resistance of nonmetals B: | No specific resistance |
| Clear width A: | 4 mm |
| Clear width B: | 1 mm |
| Connection thread: | UNC 7/8-9 |
| Drive shaft seal: | Carbide slide ring |
| Inner diameter A: | 4 mm |
| Inner diameter B: | 1 mm |
| Maximum pressure: | 25 bar |
| Mech. resistance A: | Wear resistant |
| Mech. resistance B: | Wear resistant |
| Mixing system: | Static-dynamic mixing system |
| Needle seal type A: | V sleeves |
| Needle seal type B: | Stuffing box seal |
| Working pressure: | 16 bar |
Accessory Items
Solenoid valve with industrial plug type CI and holding sheet metal
Article number: 1023740
Price on request
Cleaner valve ID 1
Article number: 401.00.09
Based on the time-pressure dispensing principle, the needle dispensing valves are most effective in continuous applications of low to high viscosity media. Consisting of two structurally separate parts, they have the advantage that material cannot leak into the drive cylinder and interfere with the valve needle movement. The size of the orifice is regulated simply by a stop screw. A special, adjustable seal closes the valve needle off from the valve head, ensuring a perfectly clean and precise application of every single shot. The material passageway can be flushed as and when necessary.
Price on request
