One-way needle Ø 1.54
Available downloads for "One-way needle Ø 1.54"
Login
Product information "One-way needle Ø 1.54"
| Inner diameter: | 1.54 mm, mm |
|---|
Accessory Items
Dynastat ID4/4
Article number: 1010912
The DOPAG dynastat is used to process 2K materials. With its static dnymic mixing principle it is ideal for high mixing ratios (e.g. 100:5) and when there is a large difference between the viscosities of A and B material. With the dynastat very small metering volumes can be achieved at small output rates. Different sealing and material versions for chemically aggressive and abrasive 2K materials are available.
Price on request
2K Valve ID6/6
Article number: 400.17.03
DOPAG 2K valves are used to process 2K materials with similar viscosities and a relatively long pot life. Recommended mixing ratios are from 100:100 to 100:20. The static mixing system consists of pneumatic driven snuff back piston and a plastic mixer. Due to the infinitely adjustable snuff back function dripping is avoided when metering ends. Different sealing and material versions for chemically aggressive and abrasive 2K materials are available.
Price on request
PCP1/0.15-AH11L-ML
Article number: 1020347
The progressive cavity pump PCP1 is a high-precision volumetric metering system that operates with low shear rate and pulsations. The rotary motion of the eccentric screw ensures highly precise and constant metering, particularly in the case of small output rates from 0.1 ml/min. Due to the servo drive the metering volume is infinitely adjustable and dot or bead applications are possible. The special rotor stator combination prevents excessive wear when processing abrasive materials. This guarantees a long service life and high cost efficiency.
Price on request
Dynastat ID4/1
Article number: 560.15.81
The DOPAG dynastat is used to process 2K materials. With its static dnymic mixing principle it is ideal for high mixing ratios (e.g. 100:5) and when there is a large difference between the viscosities of A and B material. With the dynastat very small metering volumes can be achieved at small output rates. Different sealing and material versions for chemically aggressive and abrasive 2K materials are available.
Price on request
PCP1/0.05-SH11L-ML
Article number: 1028412
The progressive cavity pump PCP1 is a high-precision volumetric metering system that operates with low shear rate and pulsations. The rotary motion of the eccentric screw ensures highly precise and constant metering, particularly in the case of small output rates from 0.1 ml/min. Due to the servo drive the metering volume is infinitely adjustable and dot or bead applications are possible. The special rotor stator combination prevents excessive wear when processing abrasive materials. This guarantees a long service life and high cost efficiency.
Price on request
PCP1/0.01-AH21L-ML
Article number: 1025907
The progressive cavity pump PCP1 is a high-precision volumetric metering system that operates with low shear rate and pulsations. The rotary motion of the eccentric screw ensures highly precise and constant metering, particularly in the case of small output rates from 0.1 ml/min. Due to the servo drive the metering volume is infinitely adjustable and dot or bead applications are possible. The special rotor stator combination prevents excessive wear when processing abrasive materials. This guarantees a long service life and high cost efficiency.
Price on request
Mixing block ID4/2
Article number: 1011923
DOPAG 2K valves are used to process 2K materials with similar viscosities and a relatively long pot life. Recommended mixing ratios are from 100:100 to 100:20. The static mixing system consists of pneumatic driven snuff back piston and a plastic mixer. Due to the infinitely adjustable snuff back function dripping is avoided when metering ends. Different sealing and material versions for chemically aggressive and abrasive 2K materials are available.
Price on request
PCP1/0.15-SH11L-ML
Article number: 1029860
The progressive cavity pump PCP1 is a high-precision volumetric metering system that operates with low shear rate and pulsations. The rotary motion of the eccentric screw ensures highly precise and constant metering, particularly in the case of small output rates from 0.1 ml/min. Due to the servo drive the metering volume is infinitely adjustable and dot or bead applications are possible. The special rotor stator combination prevents excessive wear when processing abrasive materials. This guarantees a long service life and high cost efficiency.
Price on request
PCP1/0.3-AH11L-ML
Article number: 1025911
The progressive cavity pump PCP1 is a high-precision volumetric metering system that operates with low shear rate and pulsations. The rotary motion of the eccentric screw ensures highly precise and constant metering, particularly in the case of small output rates from 0.1 ml/min. Due to the servo drive the metering volume is infinitely adjustable and dot or bead applications are possible. The special rotor stator combination prevents excessive wear when processing abrasive materials. This guarantees a long service life and high cost efficiency.
Price on request
Mixing block ID8/8
Article number: 560.30.57
DOPAG 2K valves are used to process 2K materials with similar viscosities and a relatively long pot life. Recommended mixing ratios are from 100:100 to 100:20. The static mixing system consists of pneumatic driven snuff back piston and a plastic mixer. Due to the infinitely adjustable snuff back function dripping is avoided when metering ends. Different sealing and material versions for chemically aggressive and abrasive 2K materials are available.
Price on request
Hand metering valve 0.003-0.2ml
Article number: 1017514
Needle metering valves are suitable for dot application of low to high viscosity media. With this series, very small quantities of up to 3 ml per shot can be discharged with high reproducibility and short cycle times. The valve consists of two structurally separate parts, meaning that material cannot leak into the drive cylinder and interfere with the movement of the valve needle. This feature makes the needle metering valve an exceptionally reliable and low-maintenance piece of metering equipment. Shot size is determined by the volume of the valve chamber, which can be adjusted simply within a predetermined range using a stop screw. The metering cycle can be controlled either pneumatically or electrically via a solenoid valve. DOPAG needle metering valves are perfectly suitable for manual applications with a handle as well as for fully automated processes.
Price on request
2K Valve ID4/4
Article number: 400.05.60
DOPAG 2K valves are used to process 2K materials with similar viscosities and a relatively long pot life. Recommended mixing ratios are from 100:100 to 100:20. The static mixing system consists of pneumatic driven snuff back piston and a plastic mixer. Due to the infinitely adjustable snuff back function dripping is avoided when metering ends. Different sealing and material versions for chemically aggressive and abrasive 2K materials are available.
Price on request
Hand dispensing valve ID2.5
Article number: 1019639
Based on the time-pressure dispensing principle, the needle dispensing valves are most effective in continuous applications of low to high viscosity media. Consisting of two structurally separate parts, they have the advantage that material cannot leak into the drive cylinder and interfere with the valve needle movement. The size of the orifice is regulated simply by a stop screw. A special, adjustable seal closes the valve needle off from the valve head, ensuring a perfectly clean and precise application of every single shot. The material passageway can be flushed as and when necessary.
Price on request
2K Valve ID4/4
Article number: 401.06.40
DOPAG 2K valves are used to process 2K materials with similar viscosities and a relatively long pot life. Recommended mixing ratios are from 100:100 to 100:20. The static mixing system consists of pneumatic driven snuff back piston and a plastic mixer. Due to the infinitely adjustable snuff back function dripping is avoided when metering ends. Different sealing and material versions for chemically aggressive and abrasive 2K materials are available.
Price on request
Hand metering valve 0.003-0.2ml
Article number: 1017829
Needle metering valves are suitable for dot application of low to high viscosity media. With this series, very small quantities of up to 3 ml per shot can be discharged with high reproducibility and short cycle times. The valve consists of two structurally separate parts, meaning that material cannot leak into the drive cylinder and interfere with the movement of the valve needle. This feature makes the needle metering valve an exceptionally reliable and low-maintenance piece of metering equipment. Shot size is determined by the volume of the valve chamber, which can be adjusted simply within a predetermined range using a stop screw. The metering cycle can be controlled either pneumatically or electrically via a solenoid valve. DOPAG needle metering valves are perfectly suitable for manual applications with a handle as well as for fully automated processes.
Price on request
2K Valve ID2/2
Article number: 402.05.21
DOPAG 2K valves are used to process 2K materials with similar viscosities and a relatively long pot life. Recommended mixing ratios are from 100:100 to 100:20. The static mixing system consists of pneumatic driven snuff back piston and a plastic mixer. Due to the infinitely adjustable snuff back function dripping is avoided when metering ends. Different sealing and material versions for chemically aggressive and abrasive 2K materials are available.
Price on request
2K Valve ID8/8
Article number: 401.05.00
DOPAG 2K valves are used to process 2K materials with similar viscosities and a relatively long pot life. Recommended mixing ratios are from 100:100 to 100:20. The static mixing system consists of pneumatic driven snuff back piston and a plastic mixer. Due to the infinitely adjustable snuff back function dripping is avoided when metering ends. Different sealing and material versions for chemically aggressive and abrasive 2K materials are available.
Price on request
2K Valve ID2/2
Article number: 402.05.23
DOPAG 2K valves are used to process 2K materials with similar viscosities and a relatively long pot life. Recommended mixing ratios are from 100:100 to 100:20. The static mixing system consists of pneumatic driven snuff back piston and a plastic mixer. Due to the infinitely adjustable snuff back function dripping is avoided when metering ends. Different sealing and material versions for chemically aggressive and abrasive 2K materials are available.
Price on request
Dynastat ID4/1
Article number: 1002171
The DOPAG dynastat is used to process 2K materials. With its static dnymic mixing principle it is ideal for high mixing ratios (e.g. 100:5) and when there is a large difference between the viscosities of A and B material. With the dynastat very small metering volumes can be achieved at small output rates. Different sealing and material versions for chemically aggressive and abrasive 2K materials are available.
Price on request
Mixing block ID4/1
Article number: 403.05.40
DOPAG 2K valves are used to process 2K materials with similar viscosities and a relatively long pot life. Recommended mixing ratios are from 100:100 to 100:20. The static mixing system consists of pneumatic driven snuff back piston and a plastic mixer. Due to the infinitely adjustable snuff back function dripping is avoided when metering ends. Different sealing and material versions for chemically aggressive and abrasive 2K materials are available.
Price on request
PCP1/0.05-AH11L-ML
Article number: 1020346
The progressive cavity pump PCP1 is a high-precision volumetric metering system that operates with low shear rate and pulsations. The rotary motion of the eccentric screw ensures highly precise and constant metering, particularly in the case of small output rates from 0.1 ml/min. Due to the servo drive the metering volume is infinitely adjustable and dot or bead applications are possible. The special rotor stator combination prevents excessive wear when processing abrasive materials. This guarantees a long service life and high cost efficiency.
Price on request
Dynastat ID4/4
Article number: 560.15.80
The DOPAG dynastat is used to process 2K materials. With its static dnymic mixing principle it is ideal for high mixing ratios (e.g. 100:5) and when there is a large difference between the viscosities of A and B material. With the dynastat very small metering volumes can be achieved at small output rates. Different sealing and material versions for chemically aggressive and abrasive 2K materials are available.
Price on request
2K Valve ID6/6
Article number: 400.17.04
DOPAG 2K valves are used to process 2K materials with similar viscosities and a relatively long pot life. Recommended mixing ratios are from 100:100 to 100:20. The static mixing system consists of pneumatic driven snuff back piston and a plastic mixer. Due to the infinitely adjustable snuff back function dripping is avoided when metering ends. Different sealing and material versions for chemically aggressive and abrasive 2K materials are available.
Price on request
PCP1/0.05-AH21L-ML
Article number: 1021232
The progressive cavity pump PCP1 is a high-precision volumetric metering system that operates with low shear rate and pulsations. The rotary motion of the eccentric screw ensures highly precise and constant metering, particularly in the case of small output rates from 0.1 ml/min. Due to the servo drive the metering volume is infinitely adjustable and dot or bead applications are possible. The special rotor stator combination prevents excessive wear when processing abrasive materials. This guarantees a long service life and high cost efficiency.
Price on request
Mixing block ID4/4
Article number: 560.30.09
DOPAG 2K valves are used to process 2K materials with similar viscosities and a relatively long pot life. Recommended mixing ratios are from 100:100 to 100:20. The static mixing system consists of pneumatic driven snuff back piston and a plastic mixer. Due to the infinitely adjustable snuff back function dripping is avoided when metering ends. Different sealing and material versions for chemically aggressive and abrasive 2K materials are available.
Price on request
PCP1/0.01-SH11L-ML
Article number: 1029492
The progressive cavity pump PCP1 is a high-precision volumetric metering system that operates with low shear rate and pulsations. The rotary motion of the eccentric screw ensures highly precise and constant metering, particularly in the case of small output rates from 0.1 ml/min. Due to the servo drive the metering volume is infinitely adjustable and dot or bead applications are possible. The special rotor stator combination prevents excessive wear when processing abrasive materials. This guarantees a long service life and high cost efficiency.
Price on request
PCP1/0.15-AH21L-ML
Article number: 1025908
The progressive cavity pump PCP1 is a high-precision volumetric metering system that operates with low shear rate and pulsations. The rotary motion of the eccentric screw ensures highly precise and constant metering, particularly in the case of small output rates from 0.1 ml/min. Due to the servo drive the metering volume is infinitely adjustable and dot or bead applications are possible. The special rotor stator combination prevents excessive wear when processing abrasive materials. This guarantees a long service life and high cost efficiency.
Price on request
Mixing block ID2/2
Article number: 560.30.13
DOPAG 2K valves are used to process 2K materials with similar viscosities and a relatively long pot life. Recommended mixing ratios are from 100:100 to 100:20. The static mixing system consists of pneumatic driven snuff back piston and a plastic mixer. Due to the infinitely adjustable snuff back function dripping is avoided when metering ends. Different sealing and material versions for chemically aggressive and abrasive 2K materials are available.
Price on request
PCP1/0.3-SH11L-ML
Article number: 1029861
The progressive cavity pump PCP1 is a high-precision volumetric metering system that operates with low shear rate and pulsations. The rotary motion of the eccentric screw ensures highly precise and constant metering, particularly in the case of small output rates from 0.1 ml/min. Due to the servo drive the metering volume is infinitely adjustable and dot or bead applications are possible. The special rotor stator combination prevents excessive wear when processing abrasive materials. This guarantees a long service life and high cost efficiency.
Price on request
PCP1/0.3-AH21L-ML
Article number: 1025912
The progressive cavity pump PCP1 is a high-precision volumetric metering system that operates with low shear rate and pulsations. The rotary motion of the eccentric screw ensures highly precise and constant metering, particularly in the case of small output rates from 0.1 ml/min. Due to the servo drive the metering volume is infinitely adjustable and dot or bead applications are possible. The special rotor stator combination prevents excessive wear when processing abrasive materials. This guarantees a long service life and high cost efficiency.
Price on request
Mixing block ID4/1
Article number: 401.05.40
DOPAG 2K valves are used to process 2K materials with similar viscosities and a relatively long pot life. Recommended mixing ratios are from 100:100 to 100:20. The static mixing system consists of pneumatic driven snuff back piston and a plastic mixer. Due to the infinitely adjustable snuff back function dripping is avoided when metering ends. Different sealing and material versions for chemically aggressive and abrasive 2K materials are available.
Price on request
Hand metering valve 0.003-0.2ml
Article number: 1017539
Needle metering valves are suitable for dot application of low to high viscosity media. With this series, very small quantities of up to 3 ml per shot can be discharged with high reproducibility and short cycle times. The valve consists of two structurally separate parts, meaning that material cannot leak into the drive cylinder and interfere with the movement of the valve needle. This feature makes the needle metering valve an exceptionally reliable and low-maintenance piece of metering equipment. Shot size is determined by the volume of the valve chamber, which can be adjusted simply within a predetermined range using a stop screw. The metering cycle can be controlled either pneumatically or electrically via a solenoid valve. DOPAG needle metering valves are perfectly suitable for manual applications with a handle as well as for fully automated processes.
Price on request
2K Valve ID4/4
Article number: 401.05.20
DOPAG 2K valves are used to process 2K materials with similar viscosities and a relatively long pot life. Recommended mixing ratios are from 100:100 to 100:20. The static mixing system consists of pneumatic driven snuff back piston and a plastic mixer. Due to the infinitely adjustable snuff back function dripping is avoided when metering ends. Different sealing and material versions for chemically aggressive and abrasive 2K materials are available.
Price on request
Hand metering valve 0.003-0.2ml
Article number: 1015590
Needle metering valves are suitable for dot application of low to high viscosity media. With this series, very small quantities of up to 3 ml per shot can be discharged with high reproducibility and short cycle times. The valve consists of two structurally separate parts, meaning that material cannot leak into the drive cylinder and interfere with the movement of the valve needle. This feature makes the needle metering valve an exceptionally reliable and low-maintenance piece of metering equipment. Shot size is determined by the volume of the valve chamber, which can be adjusted simply within a predetermined range using a stop screw. The metering cycle can be controlled either pneumatically or electrically via a solenoid valve. DOPAG needle metering valves are perfectly suitable for manual applications with a handle as well as for fully automated processes.
Price on request
2K Valve ID4/4
Article number: 401.06.60
DOPAG 2K valves are used to process 2K materials with similar viscosities and a relatively long pot life. Recommended mixing ratios are from 100:100 to 100:20. The static mixing system consists of pneumatic driven snuff back piston and a plastic mixer. Due to the infinitely adjustable snuff back function dripping is avoided when metering ends. Different sealing and material versions for chemically aggressive and abrasive 2K materials are available.
Price on request
Hand dispensing valve ID2.5
Article number: 1019415
Based on the time-pressure dispensing principle, the needle dispensing valves are most effective in continuous applications of low to high viscosity media. Consisting of two structurally separate parts, they have the advantage that material cannot leak into the drive cylinder and interfere with the valve needle movement. The size of the orifice is regulated simply by a stop screw. A special, adjustable seal closes the valve needle off from the valve head, ensuring a perfectly clean and precise application of every single shot. The material passageway can be flushed as and when necessary.
Price on request
2K Valve ID2/2
Article number: 402.05.22
DOPAG 2K valves are used to process 2K materials with similar viscosities and a relatively long pot life. Recommended mixing ratios are from 100:100 to 100:20. The static mixing system consists of pneumatic driven snuff back piston and a plastic mixer. Due to the infinitely adjustable snuff back function dripping is avoided when metering ends. Different sealing and material versions for chemically aggressive and abrasive 2K materials are available.
Price on request
2K Valve ID8/8
Article number: 403.05.00
DOPAG 2K valves are used to process 2K materials with similar viscosities and a relatively long pot life. Recommended mixing ratios are from 100:100 to 100:20. The static mixing system consists of pneumatic driven snuff back piston and a plastic mixer. Due to the infinitely adjustable snuff back function dripping is avoided when metering ends. Different sealing and material versions for chemically aggressive and abrasive 2K materials are available.
Price on request
2K Valve ID4/4
Article number: 401.05.60
DOPAG 2K valves are used to process 2K materials with similar viscosities and a relatively long pot life. Recommended mixing ratios are from 100:100 to 100:20. The static mixing system consists of pneumatic driven snuff back piston and a plastic mixer. Due to the infinitely adjustable snuff back function dripping is avoided when metering ends. Different sealing and material versions for chemically aggressive and abrasive 2K materials are available.
Price on request
PCP1/0.01-AH11L-ML
Article number: 1020344
The progressive cavity pump PCP1 is a high-precision volumetric metering system that operates with low shear rate and pulsations. The rotary motion of the eccentric screw ensures highly precise and constant metering, particularly in the case of small output rates from 0.1 ml/min. Due to the servo drive the metering volume is infinitely adjustable and dot or bead applications are possible. The special rotor stator combination prevents excessive wear when processing abrasive materials. This guarantees a long service life and high cost efficiency.
Price on request