Dispensing valve ID12
Available downloads for "Dispensing valve ID12"
Login
Product information "Dispensing valve ID12"
Based on the time-pressure dispensing principle, the needle dispensing valves are most effective in continuous applications of low to high viscosity media. Consisting of two structurally separate parts, they have the advantage that material cannot leak into the drive cylinder and interfere with the valve needle movement. The size of the orifice is regulated simply by a stop screw. A special, adjustable seal closes the valve needle off from the valve head, ensuring a perfectly clean and precise application of every single shot. The material passageway can be flushed as and when necessary.
| Chem. resistance of metals: | Stainless |
|---|---|
| Chem. resistance of nonmetals: | No specific resistance |
| Drive cylinder version: | Initiator holder |
| Inner diameter: | 12 mm |
| Material inlet connection: | G 1/2" |
| Material inlet version: | Inner thread |
| Material outlet version: | Outlet tube |
| Maximum pressure: | 315 bar |
| Mech. resistance: | No specific resistance |
| Operating type: | Pneumatically |
| Pneumatic connection to material inlet: | 0° offset |
| Seal type: | V sleeves |
| Working pressure: | 100 bar |
Accessory Items
Electronic signal transmitter with plug M8x1 and cable 5m
Article number: 1025106
The stroke detection device monitors the correct activity of various valve types. Detecting the upstroke movement of the dispensing needle or the metering piston, it sends signals to indicate the proper functioning of a valve.
Price on request
