Hand dispensing valve ID2.5
Available downloads for "Hand dispensing valve ID2.5"
Login
Product information "Hand dispensing valve ID2.5"
Based on the time-pressure dispensing principle, the needle dispensing valves are most effective in continuous applications of low to high viscosity media. Consisting of two structurally separate parts, they have the advantage that material cannot leak into the drive cylinder and interfere with the valve needle movement. The size of the orifice is regulated simply by a stop screw. A special, adjustable seal closes the valve needle off from the valve head, ensuring a perfectly clean and precise application of every single shot. The material passageway can be flushed as and when necessary.
Chem. resistance of metals: | No specific resistance |
---|---|
Chem. resistance of nonmetals: | No specific resistance |
Drive cylinder version: | Initiator holder |
Inner diameter: | 2.5 mm |
Material inlet connection: | G 1/4" |
Material inlet version: | Inner thread |
Material outlet connection: | M12x1 |
Material outlet version: | with cannula conn. |
Maximum pressure: | 315 bar |
Mech. resistance: | Increased resistance |
Operating type: | Electric Initiator |
Seal type: | Lip seal |
Version: | Handle vertical |
Working pressure: | 250 bar |